L3DT users' community
Large 3D terrain generator

Editing terrain only below specified height

Got a problem or need advice?

Editing terrain only below specified height

Postby Tonto- » Sun Mar 06, 2016 12:13 pm

Hello

Im editing heightmap that has lots of water and islands in it. The waterlevel is at one specific height so im wondering, would it be possible to determine the max height for the brush tools so it would not edit terrain lets say above 0m.

Thanks for answers!
Tonto-
New member
 
Posts: 3
Joined: Sun Mar 06, 2016 12:06 pm

Re: Editing terrain only below specified height

Postby Aaron » Mon Mar 07, 2016 1:52 pm

Hi Tonto,

Thanks for the suggestion; I'll put it on the to-do list. Do you have any priorities in terms of which heightfield tools you would most like to see with this range-limiting feature?

Best regards,
Aaron.
User avatar
Aaron
Site Admin
 
Posts: 3696
Joined: Sun Nov 20, 2005 2:41 pm
Location: Melbourne, Australia

Re: Editing terrain only below specified height

Postby Tonto- » Sat Mar 12, 2016 10:43 am

Raise/lower brushes definitely.

Cheers!
Tonto-
New member
 
Posts: 3
Joined: Sun Mar 06, 2016 12:06 pm

Re: Editing terrain only below specified height

Postby Aaron » Mon Mar 14, 2016 1:26 pm

Hi Tonto,

Okay. This shouldn't be terribly hard to do, but it will have to wait until the next release is out, which should be within a few weeks (if all continues well.) There are a couple of other items on the dev plan at the moment, so I can't make any promises as to when it will get done, but i'll be sure to post back here when it's ready for testing. Thanks again for the request, and sorry for the wait.

Best regards,
Aaron.
User avatar
Aaron
Site Admin
 
Posts: 3696
Joined: Sun Nov 20, 2005 2:41 pm
Location: Melbourne, Australia

Re: Editing terrain only below specified height

Postby Tonto- » Mon Sep 19, 2016 3:48 pm

Hello, Aaron

Can you tell is my suggestion has come any closer to top in your massive to-do pile? :)

Cheers.
Tonto-
New member
 
Posts: 3
Joined: Sun Mar 06, 2016 12:06 pm

Re: Editing terrain only below specified height

Postby Aaron » Wed Sep 21, 2016 3:49 pm

Hi Tonto,

I'm really sorry, but there's been no movement on this yet. I've got a couple of work projects going at the moment that mean I'm basically programming day and night, so there's no spare time for L3DT development right now. There won't be much movement on the to-do list until mid October at the earliest.

Best regards,
Aaron.
User avatar
Aaron
Site Admin
 
Posts: 3696
Joined: Sun Nov 20, 2005 2:41 pm
Location: Melbourne, Australia


Return to Help and support

Who is online

Users browsing this forum: No registered users and 11 guests

cron