Insufficent memory error
Posted: Tue Oct 19, 2010 6:00 am
Hi,
I was just trying to export a simple 1024x1024 map to T3D TERv7 with 2.9Pro and I keep getting this error. I have Windows 7 x64 an 12gigs of RAM
Suggestions?
Error Report:
CSubMap::InitMap error - insufficient memory
The operating system could not allocate 192MB of contiguous RAM.
System memory state:
WORK_SET = 441.711MB
AVAIL_VIRT = 1.114GB
COMMIT = 3.993GB
TOTAL_PHYS = 4.000GB
L3DT memory state:
MAP_RAM = 280.133MB
MAP_PAGED = 768MB
CMapWrap::InitMap error
- cannot allocate SubMap
CatExportAreaApp::ExportArea error:
- cannot initialise map
CSubMap::InitMap error - insufficient memory
The operating system could not allocate 192MB of contiguous RAM.
System memory state:
WORK_SET = 430.395MB
AVAIL_VIRT = 1.212GB
COMMIT = 3.371GB
TOTAL_PHYS = 4.000GB
L3DT memory state:
MAP_RAM = 280.133MB
MAP_PAGED = 768MB
CMapWrap::InitMap error
- cannot allocate SubMap
CatExportAreaApp::ExportArea error:
- cannot initialise map
I was just trying to export a simple 1024x1024 map to T3D TERv7 with 2.9Pro and I keep getting this error. I have Windows 7 x64 an 12gigs of RAM
Suggestions?
Error Report:
CSubMap::InitMap error - insufficient memory
The operating system could not allocate 192MB of contiguous RAM.
System memory state:
WORK_SET = 441.711MB
AVAIL_VIRT = 1.114GB
COMMIT = 3.993GB
TOTAL_PHYS = 4.000GB
L3DT memory state:
MAP_RAM = 280.133MB
MAP_PAGED = 768MB
CMapWrap::InitMap error
- cannot allocate SubMap
CatExportAreaApp::ExportArea error:
- cannot initialise map
CSubMap::InitMap error - insufficient memory
The operating system could not allocate 192MB of contiguous RAM.
System memory state:
WORK_SET = 430.395MB
AVAIL_VIRT = 1.212GB
COMMIT = 3.371GB
TOTAL_PHYS = 4.000GB
L3DT memory state:
MAP_RAM = 280.133MB
MAP_PAGED = 768MB
CMapWrap::InitMap error
- cannot allocate SubMap
CatExportAreaApp::ExportArea error:
- cannot initialise map