Page 1 of 1
2.4b Rev. 15 CMapWrap::SetPixel error
Posted:
Tue Nov 28, 2006 4:10 pmby notareal
If plateau is painted next to map border I'll got this error during shadowmap calculation at overlaying plateaux...
CMapWrap::SetPixel error
- invalid index
Posted:
Wed Nov 29, 2006 12:21 amby Aaron
Hi Notareal,
Thanks for the bug report. Did the calculation continue, or did it halt on that error? Either way I'll fix it for the next release, but it helps me to know which module is causing the error (non-halting errors occur in the progress display, halting errors in the main calculation.)
Best regards,
Aaron.
Posted:
Wed Nov 29, 2006 1:58 pmby notareal
Calculation did continue and generated hightmap seems to be ok, but I got a feeling that it did slow calculation a lot (got bored of error log window and did not follow).
Posted:
Fri Dec 01, 2006 5:17 amby Aaron
Hi Notareal,
Could you send me the design map for this project? It's the DMF file in the project directory.
Cheers,
Aaron.
Posted:
Fri Dec 01, 2006 9:00 pmby notareal
Did happen to delete it already, but I'll try to repeat the error with similar kind setting.
edit: Getting that error with new design map too. I'll send that map after it has finished... Anyway, if you like, it's easy to repeat: Start a new design map and lay some Spec. type "Plateu" using parameter "Large". L3DT version is 2.4b Rev. 15.
Posted:
Sun Dec 03, 2006 3:45 amby Aaron
Thanks Notareal,
I've found the problem, and the fix will be in the next dev build.
Cheers,
Aaron.