L3DT users' community
Large 3D terrain generator

NTB's Terraced Hills and Valleys Vol. 1

What are you up to?

NTB's Terraced Hills and Valleys Vol. 1

Postby nicethugbert » Sat May 08, 2010 12:29 pm

Made a 4x4 grid of NWN2 areas out an L3DT map, here.

From the maker of NTB's Eroded Hills and Valleys you get this Terraced Hills and Valleys set comprised of a set of 16 connected 24x24 areas arranged in a 4x4 matrix set in a temperate climate. Only the first 6 areas are screen shotted to give you an idea.

The areas are created in L3DT and imported into the toolset with YATT.

The area spans 960x960 walkable meters wide. The altitude range is 267.03 meters.

The areas are baked. That's as far as I went. I did not make any adjustments.

There are islands of perfectly walkable terrain separated by cliffs. It's up to the module builder to connect them and clean up the few stray walkmesh dookies.

Please feel free to texture and stock and otherwise modify to your hearts content. Go wild, make it your own, like Magical Wisp did with three of mine here.

Should you like a certain section that is split between more than area try using TerraCoppa v1.8 to copy past the pieces into a new area.
Posts: 132
Joined: Sat Feb 02, 2008 12:58 pm

Postby Telarus » Sun May 09, 2010 8:48 pm

Nice work!
Posts: 112
Joined: Mon Jun 01, 2009 12:34 am

Return to Users' projects

Who is online

Users browsing this forum: No registered users and 1 guest