Page 1 of 1

NTB's Terraced Hills and Valleys Vol. 1

PostPosted: Sat May 08, 2010 12:29 pm
by nicethugbert
Made a 4x4 grid of NWN2 areas out an L3DT map, here.

From the maker of NTB's Eroded Hills and Valleys you get this Terraced Hills and Valleys set comprised of a set of 16 connected 24x24 areas arranged in a 4x4 matrix set in a temperate climate. Only the first 6 areas are screen shotted to give you an idea.

The areas are created in L3DT and imported into the toolset with YATT.

The area spans 960x960 walkable meters wide. The altitude range is 267.03 meters.

The areas are baked. That's as far as I went. I did not make any adjustments.

There are islands of perfectly walkable terrain separated by cliffs. It's up to the module builder to connect them and clean up the few stray walkmesh dookies.

Please feel free to texture and stock and otherwise modify to your hearts content. Go wild, make it your own, like Magical Wisp did with three of mine here.

Should you like a certain section that is split between more than area try using TerraCoppa v1.8 to copy past the pieces into a new area.

PostPosted: Sun May 09, 2010 8:48 pm
by Telarus
Nice work!