====== Bulldozer brush ======
The bulldozer brush lets you create a level pathway between two points. This can be useful for making **roads**, **walls**, **dams** or **trenches**. The bulldozer tool also automatically creates an embankment if the paththway is above the terrain, or a cutting if the pathway is below the terrain. Here is an example of the bullfozer brush in operation (left), and the results (right):
| {{:plugins:sapphire:userguide:hf_edit:bulldozer1.jpg|:plugins:sapphire:userguide:hf_edit:bulldozer1.jpg}} | {{:plugins:sapphire:userguide:hf_edit:bulldozer2.jpg|:plugins:sapphire:userguide:hf_edit:bulldozer2.jpg}} |
Here is a video example of the Bulldozer brush in operation:
===== Bulldozer brush settings =====
The bulldozer settings are as follows:
^ Label ^ Default value ^ What is it? ^
| Edge slope (deg) | 45.0 | The slope of the embankment on either side of the road, in degrees (larger is steeper). ^
| Edge width (px) | 100 | The maximum width, in pixels, of the embankment on either side of the road. |
| Vert. offset (m) | 0 | The height of the road above the start and end points, in metres. Use a negative value to dig a trench, and a positive value to build a wall. |
To change the width of the road, use the mouse scroll-wheel (as with all other tools).
^ << //[[plugins:sapphire:userguide:hf_edit|Back to heightfield tools]]// << ^