Got a problem or need advice?
by scania970 » Tue Oct 09, 2012 7:06 pm
Hello to everybody I play Rigs of Rods and i'm remaking some zone of my map exporting it on L3DT Pro 11.11 (Trial). I modify the Heightfield and than I regenerate (with Calculation Wizard) Heightfield, attributes map, light map, water map, ... I don't regen the Texture map because i've it, so I need only to modify some little zones with the paint Brush When i start to use the brush, L3Dt crash, Why? Sorry for my bad english, I'm italian
-
scania970
- Member
-
- Posts: 20
- Joined: Tue Oct 09, 2012 7:01 pm
- Location: Prato (Italy)
by Aaron » Wed Oct 10, 2012 12:07 pm
Hi Scania970, I apologise for this fault. Can you please send me the log file after the crash occurs? (to aaron@bundysoft.com) You can get the log file using the 'All programs->Bundysoft->L3DT [version]->L3DT logs' shortcut in the Windows start menu. In that directory, you will find a file called 'log.txt'. With the logfile, I will be able to work out what is going wrong. Best regards, Aaron
-
Aaron
- Site Admin
-
- Posts: 3696
- Joined: Sun Nov 20, 2005 2:41 pm
- Location: Melbourne, Australia
-
by scania970 » Sat Oct 13, 2012 12:57 pm
So you can't do nothing?
-
scania970
- Member
-
- Posts: 20
- Joined: Tue Oct 09, 2012 7:01 pm
- Location: Prato (Italy)
by Aaron » Sun Oct 14, 2012 4:37 am
Hi Scania970,
Thank you for the log file. I will look into this fault over the next few days, and I'll post back here when it's fixed.
Best regards, Aaron.
-
Aaron
- Site Admin
-
- Posts: 3696
- Joined: Sun Nov 20, 2005 2:41 pm
- Location: Melbourne, Australia
-
by scania970 » Wed Oct 31, 2012 4:00 pm
Thankyou, hope you will help me
-
scania970
- Member
-
- Posts: 20
- Joined: Tue Oct 09, 2012 7:01 pm
- Location: Prato (Italy)
by scania970 » Mon Nov 12, 2012 5:15 pm
Any progress ?
-
scania970
- Member
-
- Posts: 20
- Joined: Tue Oct 09, 2012 7:01 pm
- Location: Prato (Italy)
by Aaron » Tue Nov 13, 2012 11:16 am
Hi Scania970,
I apologise for the delay in my reply. I've not been able to reproduce this fault yet. Can you please download and try the latest developmental build (L3DT v12.10 build 1), and let mew know if the problem re-occurs? I'll send you the installer link in a PM.
Best regards, Aaron.
-
Aaron
- Site Admin
-
- Posts: 3696
- Joined: Sun Nov 20, 2005 2:41 pm
- Location: Melbourne, Australia
-
by scania970 » Tue Nov 13, 2012 7:24 pm
Ok thankyou I'll say you if the problem is solved. Thanks for you time
-
scania970
- Member
-
- Posts: 20
- Joined: Tue Oct 09, 2012 7:01 pm
- Location: Prato (Italy)
by scania970 » Tue Nov 13, 2012 7:34 pm
Ok the problem isn't fixed Where i can find the log file i can't find it
-
scania970
- Member
-
- Posts: 20
- Joined: Tue Oct 09, 2012 7:01 pm
- Location: Prato (Italy)
by Aaron » Wed Nov 14, 2012 11:27 am
Hi Scania970,
To find the log file, go to the Start menu in Windows, and select the 'All programs->Bundysoft->L3DT [version]->L3DT logs' shortcut. This shortcut will open a folder, in which you will find a file called 'log.txt'. This is the logfile I need.
Best regards, Aaron
-
Aaron
- Site Admin
-
- Posts: 3696
- Joined: Sun Nov 20, 2005 2:41 pm
- Location: Melbourne, Australia
-
by scania970 » Thu Nov 15, 2012 5:06 pm
Ok thankyou. This is the log file: Download
-
scania970
- Member
-
- Posts: 20
- Joined: Tue Oct 09, 2012 7:01 pm
- Location: Prato (Italy)
by Aaron » Thu Nov 22, 2012 2:31 pm
Hi Scania,
Thank your for the log. It seems like the error is occurring in the backup/undo handling code for the brush tool. Can you please select the 'Edit->Enable undo' option in the L3DT menu to disable undo, and then try again? Please let me know how it goes.
Best regards, Aaron.
-
Aaron
- Site Admin
-
- Posts: 3696
- Joined: Sun Nov 20, 2005 2:41 pm
- Location: Melbourne, Australia
-
by scania970 » Thu Dec 06, 2012 2:44 pm
unlucky, the problem is the same
-
scania970
- Member
-
- Posts: 20
- Joined: Tue Oct 09, 2012 7:01 pm
- Location: Prato (Italy)
by Aaron » Thu Dec 13, 2012 12:35 pm
Hi Scania, I apologise again for this bug. Unfortunately, I've not yet been able to reproduce it. Can I ask you to please e-mail me the project and map definition files for your map? (to aaron@bundysoft.com) These are the '.proj.' and '.def.xml' files in your project folder. These files might help me identify a factor I haven't tried yet. Has anyone else in the community had problems with the texture brush in Sapphire? Anybody? Best regards, Aaron.
-
Aaron
- Site Admin
-
- Posts: 3696
- Joined: Sun Nov 20, 2005 2:41 pm
- Location: Melbourne, Australia
-
Return to Help and support
Who is online
Users browsing this forum: No registered users and 6 guests
|