Hi Aaron,
Just a slight error with the "Hight-field tools-> Level at". It is leveling at 10x the input value. So (for example) if I level at 10, it actually levels at 100.
Regards,
- Stem
Level at
3 posts
• Page 1 of 1
Re: Level atHi Stem,
Wow, thanks for this bug report. That has apparently been a fault since this particular tool was introduced in L3DT v2.6 in August of 2008. Since no-one else reported this fault in the past 3.5 years, one is inclined to conclude 'level at' is not terribly popular with users. Good to know. Anyway, the scaling factor that you found to be 10x is actually the horizontal scale; Sapphire internally uses a coordinate system scaled down by the horizontal scale such that adjacent pixels are 1 unit apart. In this case I forgot to take this scaling into account when setting the heights of the 'level at' tool start and end points. The fix is done, and will be wrapped into the next developmental build. If you need the fix immediately, the updated plugin is available here: http://www.bundysoft.com/L3DT/downloads/plugins/bin/Sapphire-bin.zip Thanks again! Regards, Aaron.
Re: Level atHi Aaron,
I am currently experimenting (well, more like playing) with all the hightfield tools, adding roads/steps etc, then blending them into the surround. Many thanks for the (very quick) fix. I have downloaded, and it is working correctly. Best Regards, - Stem
3 posts
• Page 1 of 1
Who is onlineUsers browsing this forum: No registered users and 39 guests |